Neotech-communications FEC-11CP Manuel d'utilisateur télécharger pdf

FEC-11CP Series

Industrial 10/100Base-TX Ethernet over Coaxial Converter with PoE & PoC

1 V1.3

This quick start guide describes how to install and use the FEC-11CP Series Ethernet-over-coax (EoC) converter

with Power over Coax (PoC) and Power over Ethernet (PoE). The EoC converter introduced here consists of a

transmitter (TX) and receiver (RX) and provides one channel for Ethernet over a coaxial cable with PoC/PoE.

Product Overview

Transmitter

Receiver

Product Features

 Complies with EN55022 Class A EMC Generic standard immunity.

 Operates transparent to higher layer protocols.

 One Ethernet port (RJ-45 connector): 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto-MDI/MDIX.

 Complies with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX standards.

 Supports IEEE 8023af Power over Ethernet (PoE) Power Sourcing Equipment (PSE)

 One Ethernet Extender port (BNC connector): Downlink: 36Mbps (max.); Uplink: 11Mbps (max.).

 Maximum distance: 500m over Coax.

 Provides BNC connector (female).

 External AC to DC power adapter.

 Operating voltage and max. current consumption: 0.8A @ 48VDC. Power consumption: 38.4W Max.

 -10°C to 60°C (14°F to 140°F) operating temperature range.

 Supports Wall Mounting installation.

 Used as a stand-alone device.

1 2 3

FEC-11CP Series Industrial 10/100Base-TX Ethernet over Coaxial Converter with PoE & PoC 1 V1.3 This quick start guide describes how t

Page 2

FEC-11CP Series Industrial 10/100Base-TX Ethernet over Coaxial Converter with PoE & PoC 2 V1.3 Connecting to Power The EoC converter

Page 3

FEC-11CP Series Industrial 10/100Base-TX Ethernet over Coaxial Converter with PoE & PoC 3 V1.3 Coaxial Link Data Rate There is a swit

Pas de commentaire

Neotech-communications FEC-11CP Manuel d'utilisateur