Neotech-communications FSW-41HP Manuel d'utilisateur télécharger pdf (Page 2)

FSW-41HP

Unmanaged Industrial 4-port 10/100Base-TX + 1-port 100Base-FX SFP Ethernet Switch with PoE+

2 V1

Installation

1. Connect one end of the Ethernet cables to their corresponding ports on the product. Connect the

other end to the network equipment such as IP cameras, Switches or PCs. Insert the SFP and

connect the optical fiber cables to its connectors.

2. Connect the product with the power adapter and switch on the product, the PWR indicator should

then be ON. If it is not, please check whether the power cable is connected properly and the power

supply functions normally.

3. After all cables are connected, corresponding indicators will be on. Please refer to the Operational

Instructions for detail descriptions.

Cable Connections

Signal Type Cable Type Connector

Ethernet Cat. 5 or above RJ45

Optical SM/MM Optical fiber cable (depends on SFP) LC

Power supply Power cable 2-pin Terminal Block

Interface

Ethernet Port:

RJ45 Pin Assignment:

Pin Assignment

1 Output Transmit Data +

2 Output Transmit Data -

3 Input Receive Data +

4 Positive (VCC+)

5 Positive (VCC+)

6 Input Receive Data -

7 Negative (VCC-)

8 Negative (VCC-)

Power Connector:

Description

- +

Power Input

GND

+48V

(DC)

1 2 3

Pas de commentaire

Neotech-communications FSW-41HP Manuel d'utilisateur Page 2